How to Install Printer Canon G2020 Series – Easy Step-by-Step Guide

Setting up your Canon G2020 Series Printer is quick and simple. Follow these steps to complete your canon printer setup and install the official drivers safely.

Step 1: Unbox and Prepare the Printer

  • Remove the printer from the box.
  • Take off all protective tapes and packaging.
  • Fill the ink tanks (if not pre-installed).
  • Turn on the printer.

Step 2: Connect the Printer

  • USB Connection: Plug the USB cable into your PC.
  • Wi-Fi Connection: Use the printer’s control panel to connect to your Wi-Fi network.

Step 3: Download Canon G2020 Drivers

  • Visit ij.start.canon or canon.com/ijsetup to download drivers directly from the official Canon website.
  • Enter your printer model: Canon G2020.
  • Select your operating system (Windows or macOS).
  • Download the Full Driver & Software Package.

Step 4: Install the Drivers

  • Open the downloaded driver file.
  • Click Run / Install.
  • Accept the license agreement.
  • Follow the on-screen instructions.
  • Choose USB or Wi-Fi connection for your setup.

Step 5: Test Your Printer

  • Print a test page to ensure everything is working properly.
  • Check that your printer appears under Settings > Devices > Printers & Scanners.

Tips for Smooth Canon Printer Setup

  • Make sure your PC and printer are on the same Wi-Fi network if using wireless setup.
  • Restart your computer if the printer is not detected.
  • Keep your printer’s serial number handy for driver updates and official Canon support.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.